|
PS-2A(PLL-70) Portable Spectrum Analyzer
0.1 to 1060MHz (1175MHz max.)
70MHz frequency locked
-108 to +20dBm input range
Resolution bandwidth: (1KHz) 10KHz 30KHz
100KHz 300KHz 1MHz
50dB input attenuator in 10dB steps
2 / 10dB/Div display scale with base line
clipper
Built-in AM/FM demodulation with monitoring
speaker
AC / DC / Battery powered (Battery Option
Not Installed) Purchase or home brew.
Lightweight - portable operating. Size: 10.3"
W x 4.0" H x 12.3" D
Optional carrying case
PS-2A
Series Portable Spectrum Analyzers
Specifications:
FREQUENCY
DISPLAY
Frequency
Range: Screen Display Ranges:
0.1
- 1060 MHz (1175 MHz Max.) 80 dB (10 dB/Div),
16 dB (2 dB/Div)
Frequency
Span Ranges: Total Dynamic Range:
0 -
100 MHz/Div (11 steps) in 1-2-5 130 dB (with
50 dB attenuator applied)
sequency
+ zero (Audio Demod) Reference Level Accuracy:
+/- 2 dB
Frequency
Span Accuracy: +/- 10%
Resolution
Bandwidths (- 3 dB): Frequency Readout:
10
KHz, 30 KHz, 100 KHz, 300 KHz, 1 MHz 4 digit
LED display, resolution 1 MHz
(internal
auto switched) Frequency Accuracy:
Residual
FM: 20 KHz p-p 1 MHz of mid dispersion (at
slow scan rate)
Drift:
< 150 KHz/Hour (after 60 min. warmup)
Scan
Rate: 3 - 30 Hz (adjustable)
AMPLITUDE
Video Filter: 3 KHz (on/off mode)
Measurement
Range:
- 108
dBm to + 20 dBm (at narrow Res.BW) AUDIO
Flatness:
+/- 2 dB (reference at 500 MHz)
Sensitivity:
< -95 dBm
Log
Scale Accuracy: Demodulation: AM and FM
(Audio/Video)
10
dB/Div ———— +/- 2 dB over 70 dB typ. ( with
built-in speaker)
+/-
3 dB over 80 dB typ.
2 dB/Div
———— +/- 0.5 dB per 2 dB TRACKING GENERATOR
(optional TG-01)
+/-
1.5 dB over 10 dB
3rd
Order Intermodulation: Frequency Range :
1.0 - 1000 MHz
>
-70 dBc (for 2 signals at 3 MHz spaced)
Flatness:
+/- 2dB
Amplitude
Stability: Output Level Range: -40 dBm to
-10 dBm
+/-
2 dB in all resolution bandwidths (adjustable)
Residual
Spurious Response: Spurious: Harmonics <
-20dBc
<
-100 dBm ( with no signal input) Non-Harmonics
< -40dBc
Average
Noise Level: Output Impedance: 50 Ohm BNC
type
<
-108 dBm (at narrow span width)
GENERAL
CHARACTERISTICS
INPUT
CRT:
3.5 inch, green phosphor, 8 x 10 graticules
RF
Input: 50 Ohm BNC type ( > 15dB R.L.)
Temperature: (operating) -10 to +45 8C
Input
Reference Level: Dimension: 10.3" W
x 4.0" H x 12.3" D
- 30
dBm to +20 dBm Weight: approx. 10 lbs (without
options)
Power
Requirements:
Input
Attenuator: AC: 115 / 230 VAC +/-10% 50/60
Hz
50
dB range in 10 dB steps External DC Source:
+ 12 to + 14 V ( 1.0 A)
Max
Input Level: Internal: +12 VDC battery pack
(3.4 Ahr)
+ 20
dBm or +/- 25 VDC with maximum (optional
BAT-02)
input
attenuationAutomotive DC-DC Charging System
ACCESSORIES
SUPPLIED: OPTIONS:
Ö Carrying
bail & tensioning knobs HD-04 Ö Tracking
Generator (PS-2A only) TG-01
Ö 120
VAC power cord AC-05 Ö + 12 VDC battery
pack & charging
Ö Spare
fuse X-001 circuitry installed inside the
unit BAT-02
Ö Operator’s
manual VT-2A Ö Cordura Nylon Carrying Case
CAS-06
(Specifications
subject to change without notice) MADE IN
U.S.A.
|